寰标网-搜索-全部-国际标准

已选条件： 国际瑞士

出版机构：

标准状态：

发布时间：

实施时间

每页显示20 条，共找到 25012 条结果 <2/1251>

	SN EN ISO 3503:2015现行 Plastics Piping Systems - Mechanical Joints Between Fittings And Pressure Pipes - Test Method For Leaktightness Under Internal Pressure Of Assemblies Subjected To Bending (Iso 3503:2015) 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：4
	SN EN ISO 14323:2015现行 Resistance Welding - Destructive Testing Of Welds - Specimen Dimensions And Procedure For Impact Tensile Shear Test And Cross-Tension Testing Of Resistance Spot And Embossed Projection Welds (Iso 14323:2015) 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：23
	SN EN 16421:2014现行 Influence Of Materials On Water For Human Consumption - Enhancement Of Microbial Growth (Emg) 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：4
	SN EN 13765:2010现行 Thermoplastic Multi-Layer (Non-Vulcanized) Hoses And Hose Assemblies For The Transfer Of Hydrocarbons, Solvents And Chemicals - Specification 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：33
	SN EN 13718-2:2015现行 Medical Vehicles And Their Equipment - Air Ambulances - Part 2: Operational And Technical Requirements For Air Ambulances 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：17
	SN EN 14997:2015现行 Characterization Of Waste - Leaching Behaviour Test - Influence Of Ph On Leaching With Continuous Ph Control 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：3
	SN EN ISO 6508-3:2015现行 Metallic Materials - Rockwell Hardness Test - Part 3: Calibration Of Reference Blocks (Iso 6508-3:2015) 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：17
	SN EN ISO 17778:2015现行 Plastics Piping Systems - Fittings, Valves And Ancillaries - Determination Of Gaseous Flow Rate/Pressure Drop Relationships (Iso 17778) 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：6
	SN EN 16615:2015现行 Chemical Disinfectants And Antiseptics - Quantitative Test Method For The Evaluation Of Bactericidal And Yeasticidal Activity On Non-Porous Surfaces With Mechanical Action Employing Wipes In The Medical Area (4- Field Test) - Test Method And Requirements (Phase 2, Step 2) 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：4
	SN EN 16442:2015现行 Controlled Environment Storage Cabinet For Processed Thermolabile Endoscopes 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：5
	SN EN 15863:2015现行 Characterization Of Waste - Leaching Behaviour Test For Basic Characterization - Dynamic Monolithic Leaching Test With Periodic Leachant Renewal, Under Fixed Conditions 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：4
	SN EN ISO 18103:2015现行 Superfine Woven Wool Fabric Labelling - Requirements For Super S Code Definition (Iso 18103:2015) 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：3
	SN EN 4641-101:2015现行 Aerospace Series - Cables, Optical 125 [Mu]M Diameter Cladding - Part 101: Tight Structure 62,5 [Mu]M Core Gi Fibre 0,9 Mm Outside Diameter - Product Standard 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：3
	SN EN 4630:2015现行 Aerospace Series - Steel X4crnimo16-5-1 (1.4418) - Air Melted - Hardened And Tempered - Forgings - D[E] <= 200 Mm - 900 Mpa <= R[M] <= 1050 Mpa 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：2
	SN EN ISO 22007-6:2015现行 Plastics - Determination Of Thermal Conductivity And Thermal Diffusivity - Part 6: Comparative Method For Low Thermal Conductivities Using A Temperature-Modulation Technique (Iso 22007-6:2014) 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：5
	SN EN 16653:2015现行 Rubber Or Plastics-Coated Fabrics - Determination Of Stitch Tear Resistance (Using A Needle) - Test Method 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：3
	SNR CEN/TS 12404:2015现行 Durability Of Wood And Wood-Based Products - Assessment Of The Effectiveness Of A Masonry Fungicide To Prevent Growth Into Wood Of Dry Rot Serpula Lacrymans (Schumacher Ex Fries) S.F. Gray - Laboratory Method 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：5
	SN EN ISO 899-2:2003现行 Plastics - Determination Of Creep Behaviour - Part 2: Flexural Creep By Three-Point Loading (Iso 899-2:2003/Amd 1:2015) 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：35
	SN EN ISO 899-1:2003现行 Plastics - Determination Of Creep Behaviour - Part 1: Tensile Creep (Iso 899-1:2003/Amd 1:2015) 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：50
	SN EN ISO 6508-2:2015现行 Metallic Materials - Rockwell Hardness Test - Part 2: Verification And Calibration Of Testing Machines And Indenters (Iso 6508-2:2015) 实施时间：2015-05-01 出版机构：瑞士标准化协会国家：瑞士被引频次：17

全选

首页上一页 123 4 5 6 ...下一页尾页

推荐阅读

Hexalobular socket head cap screws
Energy performance of fenestration systems for residential buildings - Calculation procedure
Aerospace Series - Cable Outlet Accessories for Circular and Rectangular Electrical and Optical Connectors Part 002: Index of Product Standards
Aerospace Series - Cable Outlet Accessories for Circular and Rectangular Electrical and Optical Connectors Part 064: Cable Outlet, Style k, Straight, for Heat Shrinkable Boot, Shielded, Sealed, Self-locking for en 2997 - Product Standard
Welding Consumables - Tubular Cored Electrodes for gas Shielded and Non-gas Shielded Metal arc Welding of Non-alloy and Fine Grain Steels - Classification (iso 17632:2015)
Slide Fasteners (zips) - Specification
Railway Applications - Methods for Calculation of Stopping and Slowing Distances and Immobilization Braking Part 2: Step by Step Calculations for Train Sets or Single Vehicles
Cleanrooms and Associated Controlled Environments Part 1: Classification of air Cleanliness by Particle Concentration (iso 14644-1:2015) & Part 2: Monitoring to Provide Evidence of Cleanroom Performance Related to air Cleanliness by Particle Concentration (iso 14644-2:2015)
Welding Consumables - Wire Electrodes, Wires and Rods for Welding of Aluminium and Aluminium Alloys - Classification (iso 18273:2015)
Railway Applications - Brake Discs for Railway Rolling Stock Part 3: Brake Discs, Performance of the Disc and the Friction Couple, Classification