当前位置： 首页 > 标准详情页

IEC 61340-5-1 Ed. 1.0被替代

Electrostatics Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements

出版：International Electrotechnical Committee

获取原文如何获取原文？问客服获取原文，即可享受本标准状态变更提醒服务！

专家解读视频

基本信息

标准编号： IEC 61340-5-1 Ed. 1.0

发布时间：2007/8/9 0:00:00

标准类别：Standard

出版单位：International Electrotechnical Committee

标准页数：38

标准简介

Applies to activities that: manufacture, process, assemble, install, package, label, service, test, inspect, transport or otherwise handle electrical or electronic parts, assemblies and equipment susceptible to damage by electrostatic discharges greater than or equal to 100 V human body model (HBM). Provides the requirements for an ESD control program. The user should refer to IEC 61340-5-2 for guidance on the implementation of this standard. Does not apply to electrically initiated explosive devices, flammable liquids, gases and powders. The purpose of this standard is to provide the administrative and technical requirements for establishing, implementing and maintaining an ESD control program (hereinafter referred to as the ""program""). The main changes with respect to the previous edition are listed below: This version of IEC 61340-5-1 focuses on the requirements for an ESD control program. In addition, this version of IEC 61340-5-1 has been aligned with other major ESD control program standards used throughout the wor

本标准替代的旧标准

IEC/TS 61340-5-1 Ed. 1.0

替代本标准的新标准

IEC 61340-5-1 Ed. 2.0

等同采用的国际标准

BS EN 61340-5-1:2007 - Identical

BS IEC 61340-5-1:1998 - Identical

CEI EN 61340-5-1 Ed. 2 (2008) - Identical

BS EN 61340-5-1:2001 - Identical

NF EN 61340-5-1:2008 - Identical

NF EN 61340-5-1:2001 - Identical

CEI EN 61340-5-1 Ed. 1 (2001) - Identical