SN EN ISO 898-5:2012现行
Mechanical Properties Of Fasteners Made Of Carbon Steel And Alloy Steel - Part 5: Set Screws And Similar Threaded Fasteners With Specified Hardness Classes - Coarse Thread And Fine Pitch Thread (Iso 898-5:2012)
出版：Swiss Standards
专家解读视频
Defines the mechanical properties of set screws and similar threaded fasteners not under tensile stresses, having nominal thread diameters between 1.6 mm and 24 mm inclusive, made from carbon steel or alloy steel. Applicable for testing at an ambient temperature between 10 and 35 deg C, which will vary at higher or lower temperatures. Not applicable to set screws requiring special properties, eg specified tensile stresses, weldability, corrosion resistance and ability to withstand temperatures above + 300 deg C or below -50 deg c.
NF EN ISO 898-5:2012 - Identical
NBN EN ISO 898-5:2012 - Identical
NS EN ISO 898-5:2012 - Identical
ONORM EN ISO 898-5:2012 - Identical
DIN EN ISO 898-5 (2012-09) - Identical
UNE EN ISO 898-5:1999 - Identical
UNE EN ISO 898-5:2013 - Identical
UNI EN ISO 898-5:2012 - Identical
SS EN ISO 898-5 Ed. 2 (2012) - Identical
NEN EN ISO 898-5:2012 - Identical
BS EN ISO 898-5:2012 - Identical
I.S. EN ISO 898-5:2012 - Identical
