当前位置： 首页 > 标准详情页

ISO 7093-1:2000现行

Plain washers - Large series Part 1: Product grade A

出版：International Organization for Standardization

获取原文如何获取原文？问客服获取原文，即可享受本标准状态变更提醒服务！

专家解读视频

基本信息

标准编号： ISO 7093-1:2000

发布时间：2000/6/8 0:00:00

标准类别：Standard

出版单位：International Organization for Standardization

标准页数：5

标准简介

This part of ISO 7093 specifies the characteristics of large-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 1,6 mm to 64 mminclusive.Washers conforming to this part of ISO 7093 are intended for use in cases where soft material pieces are to be clamped or where there are large clearance holes in the workpiece. Nevertheless, in the latter case, the suitability of the washer thickness should be checked.Washers of hardness class 200 HV are suitable for- hexagon bolts and screws of product grades A and B in property classes up to and including 8.8;- hexagon nuts of product grades A and B in property classes up to and including 8;- hexagon bolts, screws and nuts of stainless steel of similar chemical composition;- case-hardened thread rolling screws.Washers of hardness class 300 HV are suitable for- hexagon bolts and screws of product grades A and B in property classes up to and including 10.9;- hexagon nuts of product grades A and B in property classes up to and including 10.If dimensions other than those listed in this part of ISO 7093 are required, they should be selected from those given in ISO 887.

本标准替代的旧标准

ISO 7093:1983

等同采用的国际标准

SS EN ISO 7093-1 Ed. 1 (2000) - Identical

NS EN ISO 7093-1 Ed. 1 (2000) - Identical

PN EN ISO 7093-1:2003 - Identical

I.S. EN ISO 7093-1:2000 - Identical

UNI EN ISO 7093-1:2001 - Identical

NBN EN ISO 7093-1:2000 - Identical

NF EN ISO 7093-1:2000 - Identical

UNE EN ISO 7093-1:2000 - Identical

GB/T 96.1-2002 - Equivalent