【BS EN ISO 7093-1:2000】 Plain washers. Large series. Product grade A-寰标网

基本信息

标准编号： BS EN ISO 7093-1:2000

发布时间：2000/9/15 0:00:00

标准类别：Standard

出版单位：British Standards Institution

标准页数：16

标准简介

This part of ISO 7093 specifies the characteristics of large-series, product-grade-A plain washers in the 200 HV and 300 HV hardness classes and of nominal sizes (nominal thread diameters) ranging from 3 mm to 36 mm inclusive. Washers conforming to this part of ISO 7093 are intended for use in cases where soft material pieces are to be clamped or where there are large clearance holes in the workpiece. Nevertheless, in the latter case, the suitability of the washer thickness should be checked. Washers of hardness class 200 HV are suitable for hexagon bolts and screws of product grades A and B in property classes up to and including 8.8; hexagon nuts of product grades A and B in property classes up to and including 8; hexagon bolts, screws and nuts of stainless steel of similar chemical composition; case-hardened thread rolling screws. Washers of hardness class 300 HV are suitable for hexagon bolts and screws of product grades A and B in property classes up to and including 10.9; hexagon nuts of product grades A and B in property classes up to and including 10. If dimensions other than those listed in this part of ISO 7093 are required, they should be selected from those given in ISO 887.

标准备注

© British Standards Institution 2013

Amendment notes:
AMD 13151 published 15 May 2001
AMD 13151 is a Corrigendum

本标准替代的旧标准

BS 4320:1968

97/706021 DC

等同采用的国际标准

ISO 7093-1:2000 - Identical

SN EN ISO 7093-1:2000 - Identical

DIN EN ISO 7093-1 (2000-11) - Identical

ONORM EN ISO 7093-1:2000 - Identical

NF EN ISO 7093-1:2000 - Identical

NBN EN ISO 7093-1:2000 - Identical