| 标准编号 |
标准名称 |
发布部门 |
发布日期 |
状态 |
| IEC TS 62898-3-1:2020 |
Microgrids – Part 3-1: Technical requirements – Protection and dynamic control |
Internatio.. |
2021-09-24 |
现行 |
| AS/NZS 2053.6:2001 (R2016) |
Conduits and fittings for electrical installations Profile-wall, smooth-bore conduits and fittings of insulating material |
Standards .. |
2021-09-22 |
现行 |
| AIAG TSG-4 : 2019 |
IATF Auditor Guide for IATF 16949 |
Automotive.. |
2021-09-22 |
现行 |
| MIL-D-3716B:1987/NOTICE 1:2020 |
Desiccants, Activated for Dynamic Dehumidification |
US Militar.. |
2021-09-17 |
被替代 |
| MIL-D-3716B(I1) :1987/NOTICE 1:2021 |
Desiccants, Activated for Dynamic Dehumidification (No S/S Document) |
US Militar.. |
2021-09-17 |
废止 |
| EN ISO 20417:2021 |
Medical devices - Information to be supplied by the manufacturer (ISO 20417:2021) |
Comite Eur.. |
2021-09-17 |
现行 |
| SAE AMS P 83461:1998 |
Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Improved Performance At 275 Deg F (135 Deg C) |
SAE Intern.. |
2021-09-14 |
现行 |
| SAE ARP 4727 : 2013 |
GLAND DESIGN, COMPUTATION OF SEAL SQUEEZE AND GLAND VOLUME |
SAE Intern.. |
2021-09-14 |
现行 |
| ISO 7425-1 : 2021 |
HYDRAULIC FLUID POWER - HOUSINGS FOR ELASTOMER-ENERGIZED, PLASTIC-FACED SEALS - DIMENSIONS AND TOLERANCES - PART 1: PISTON SEAL HOUSINGS |
Internatio.. |
2021-09-14 |
现行 |
| ISO 7425-2 : 2021 |
HYDRAULIC FLUID POWER - HOUSINGS FOR ELASTOMER ENERGIZED, PLASTIC FACED SEALS - DIMENSIONS AND TOLERANCES - PART 2: ROD SEAL HOUSINGS |
Internatio.. |
2021-09-14 |
现行 |
| ISO 5597:2018 |
Hydraulic fluid power - Cylinders - Dimensions and tolerances of housings for single-acting piston and rod seals in reciprocating applications |
Internatio.. |
2021-09-14 |
现行 |
| SAE AS 5857A : 2010(R2017) |
Gland Design, O-ring and Other Elastomeric Seals, Static Applications |
SAE Intern.. |
2021-09-14 |
现行 |
| SAE AS 4716C: 2017 |
GLAND DESIGN, O-RING AND OTHER SEALS |
SAE Intern.. |
2021-09-14 |
现行 |
| SAE AMS R 83485:2014 |
Rubber, Fluorocarbon Elastomer, Improved Performance At Low Temperatures |
SAE Intern.. |
2021-09-14 |
被替代 |
| SAE AS 83485:2014 |
O-Ring Molded From Ams7287 Material |
SAE Intern.. |
2021-09-14 |
被替代 |
| SAE AMS 3384:2013 |
Rubber, Fluorocarbon Elastomer (Fkm), 70 To 80 Hardness, Low Temperature Sealing Tg -22 Degrees F (-30 Degrees C), For Elastomeric Shapes Or Parts In Gas Turbine Engine Oil, Fuel And Hydraulic Systems |
SAE Intern.. |
2021-09-14 |
现行 |
| SAE AMS 7287:2012 |
Fluorocarbon Elastomer (Fkm) High Temperature/Hts Oil Resistant/Fuel Resistant Low Compression Set/70 To 80 Hardness, Low Temperature Tg -22 Degrees F (-30 Degrees C) For Seals In Oil/Fuel/Specific Hydraulic Systems |
SAE Intern.. |
2021-09-14 |
现行 |
| SAE AMS 3216:2017 |
Elastomer: Fluorocarbon (Fkm) Rubber High-Temperature - Fluid Resistant Low Compression Set 70 To 80 |
SAE Intern.. |
2021-09-14 |
现行 |
| SAE AMS 3218:2017 |
Elastomer: Fluorocarbon (Fkm) Rubber High-Temperature-Fluid Resistant Low Compression Set 85 To 95 |
SAE Intern.. |
2021-09-14 |
现行 |
| SAE AMS 7259:2013 |
Rubber: Flourocarbon (Fkm), High Temperature/Fluid Resistant, Low Compression Set/85 To 95 Hardness, For Seals In Fuel Systems And Specific Engine Oil Systems |
SAE Intern.. |
2021-09-14 |
现行 |
