刨床、拉床用刀具 -环标网

已选条件： 刨床、拉床用刀具

国家：

标准状态：

每页显示20 条，共找到 63 条结果 <2/4>

标准编号	标准名称	发布部门	发布日期	状态
GOST 28048:1989	Broaches With Diameter From 50 To 120 Mm For Slitting Holes With Involute Profile With Round Tail And Centring At Outside Diameter With Module From 1,5 To 2,5 Mm - Construction	Interstand..	1990-07-01	现行
GOST 28049:1989	Broaches With Diameter From 90 To 120 Mm For Slitting Holes With Involute Profile With Round Tail And Centring At Outside Diameter With Module From 2,5 Mm - Construction	Interstand..	1990-07-01	现行
NFE 66 614:1989	Internal Broaching Tools - Pushed Broaches - Dimensions Of Tail Ends, Shapes U Or V	Associatio..	1989-08-01	现行
GOST 25974:1983	Combined Alternatives Double Driven Broaches For 10 Slitting Holes With Straight Side Profile And Centring At Internal Diameter - Design And Dimensions	Interstand..	1986-01-01	现行
GOST 25971:1983	Combined Alternative Broaches For 8 Slitting Holes With Straight Side Profile And Centring At Internal Diameter - Design And Dimensions	Interstand..	1986-01-01	现行
GOST 25972:1983	Combined Alternative Double Driven Broaches For 8 Slitting Holes With Straight Side Profile And Centring At Inside Diameter - Design And Dimensions	Interstand..	1986-01-01	现行
GOST 25161:1982	Broaches With Diameter From 70 To 90 Mm For Slitting Holes With Involutes Profile And Centring At Outside Diameter With Module From 3,5 To 5 Mm - Double Driven - Construction And Dimensions	Interstand..	1984-01-01	现行
UNE 16014:1982	Shank For Turning And Planning Tools - Types And Dimensions Of The Section	Asociacion..	1982-09-15	现行
BS 1296-4:1978	Specification for single point cutting tools. Ground high speed steel tool bits	British St..	1978-01-31	现行
BS 5326:1976	Specification. Internal broaching tools and pull chuck locations	British St..	1976-04-30	现行
GOST 20364:1974	Round Broaches Of Variable Cutting Of Diameters From 10 To 13 Mm - Design And Dimensions	Interstand..	1976-01-01	现行
KS B 0813:1971	Method of life test for single point carbide tools	Korean Sta..	1971-10-20	现行
GOST 4044:1970	Round Shanks For Broaches - Types And Main Dimensions	Interstand..	1971-07-01	现行
GOST 4043:1970	Flat Shanks For Broaches - Types And Main Dimensions	Interstand..	1971-07-01	现行
NEN 1324:1967	Turning And Planning Tools - Nomenclature	Nederlands..	1967-08-01	现行
GB/T 5104-2004	The basic types and dimensions of hobs for 30°pressure angle involute splines	Standardiz..	1900-01-01	被替代
UL 745-2-14 Ed. 2 (2007)	Particular Requirements For Planers	Underwrite..	1900-01-01	现行
UNI 8079:1980	Broaching Tools - Special Round Shanks	Italian St..	1900-01-01	现行
UNI 8083-2:1980	Shanks And Tangs For Broaching Tools - Round Back Tangs	Italian St..	1900-01-01	现行
NBR 16594:2017	Woodworking Tools - Metal Planer	Brazilian ..	1900-01-01	现行

全选