金属的腐蚀 -环标网

已选条件： 金属的腐蚀

国家：

标准状态：

每页显示20 条，共找到 2823 条结果 <1/142>

标准编号	标准名称	发布部门	发布日期	状态
VDI 3822-1-2:2017	Failure Analysis - Failures Of Metallic Products Caused By Corrosion In Aqueous Media	Verlag des..	2021-02-20	现行
ISO/DIS 23123:2020	腐蚀控制工程寿命周期 - 一般要求 Corrosion control engineering life cycl — General requirements	Internatio..	2020-11-11	过渡
ISO 11845:1995	Corrosion of metals and alloys - General principles for corrosion testing	Internatio..	2020-03-05	被替代
ISO 11845:2020	Corrosion of metals and alloys — General principles for corrosion testing	Internatio..	2020-03-05	现行
ISO/DIS 22848:2020	Test method for measuring stress corrosion crack growth rate of steels and alloys under static-load condition in high-temperature water	Internatio..	2020-02-20	过渡
I.S. EN ISO 11844-3:2008	Corrosion of Metals and Alloys - Classification of low Corrosivity of Indoor Atmospheres Part 3: Measurement of Environmental Parameters Affecting Indoor Corrosivity	National S..	2020-02-18	被替代
I.S. EN ISO 11844-3:2020	Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2020)	National S..	2020-02-18	现行
ISO/DIS 23221:2020	管道腐蚀控制工程寿命周期的通用要求 General requirements for pipeline corrosion control engineering life cycle	Internatio..	2020-02-15	过渡
ISO/DIS 23222 : 2020	腐蚀控制工程生命周期-风险评估 Corrosion control engineering life cycle - Risk assessment	Internatio..	2020-02-15	过渡
JIS Z 2371:2000	Methods of salt spray testing	Japanese S..	2019-02-07	被替代
ISO 16151:2018	Corrosion of metals and alloys - Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions	Internatio..	2018-05-18	现行
ISO/FDIS 14993	Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions	Internatio..	2018-05-04	现行
ASTM B843-18	Standard Specification for Magnesium Alloy Anodes for Cathodic Protection	American S..	2018-05-01	现行
ASTM B843-18e1	Standard Specification for Magnesium Alloy Anodes for Cathodic Protection	American S..	2018-05-01	现行
ASTM G61-86(2018)	Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys	American S..	2018-05-01	现行
ISO/FDIS 20728	Corrosion of metal and alloys - Determination of resistance of magnesium alloys to stress corrosion cracking	Internatio..	2018-04-23	现行
ASTM D130-18	Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test	American S..	2018-04-01	现行
I.S. EN ISO 11130:2018	Corrosion of Metals and Alloys - Alternate Immersion Test in Salt Solution (iso 11130:2017)	National S..	2018-03-26	现行
ISO 19097-1:2018	Accelerated life test method of mixed metal oxide anodes for cathodic protection Part 1: Application in concrete	Internatio..	2018-02-08	现行
ISO 19097-2:2018	Accelerated life test method of mixed metal oxide anodes for cathodic protection Part 2: Application in soils and natural waters	Internatio..	2018-02-08	现行

全选

首页上一页12 3 4 5 6 ...下一页尾页