当前位置： 首页 > 标准详情页

IEC 60068-2-10 Ed. 6.0现行

Environmental testing Part 2-10: Tests - Test J and guidance: Mould growth

出版：International Electrotechnical Committee

获取原文如何获取原文？问客服获取原文，即可享受本标准状态变更提醒服务！

专家解读视频

基本信息

标准编号： IEC 60068-2-10 Ed. 6.0

发布时间：2005/6/13 0:00:00

标准类别：Standard

出版单位：International Electrotechnical Committee

标准页数：63

标准简介

IEC 60068-2-10:2005 Provides a test method for determining the extent to which electrotechnical products support mould growth and how any mould growth may affect the performance and other relevant properties of the product. Since mould growth conditions include high relative humidity, the test is applicable to electrotechnical products intended for transportation, storage and use under humid conditions over a period of some days at least. The main changes with respect to the previous edition are listed below: - Two test fungi replaced by two others - Concentration of the spores defined for each test fungus - Spores suspension in mineral salt solution additionally introduced - Pre-conditioning of the specimens by damp heat storage prescribed - Supersonic aerosolization of the spores suspension as the preferred inoculation method introduced - Duration of incubation reduced from 84 days to 56 days - Extent of mould growth grade 2 split into grade 2a and grade 2b - Detailed information on methods of inoculation given in Annex B - Annex E: flow-chart deleted It has the status of a horizontal standard in accordance with IEC Guide 104

本标准替代的旧标准

IEC 60068-2-10 Ed. 5.0

等同采用的国际标准

SS EN 60068 Ed. 3 (2000) - Identical

OVE/ONORM EN 60068-2-10:2006 - Identical

NEN EN IEC 60068-2-10:2005 - Identical

PN EN 60068-2-10:2007 - Identical

SS EN 60068-2-10 Ed. 1 (2005) - Identical

UNE EN 60068-2-10:2006 - Identical

BS 2011-2.1J:1989 - Equivalent

NF EN 60068-2-10:2005 - Identical

DIN EN 60068-2-10 (2006-03) - Identical