当前位置： 首页 > 标准详情页

IEC 61000-3-2 Ed. 3.0被替代

Electromagnetic compatibility (EMC) Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase)

出版：International Electrotechnical Committee

获取原文如何获取原文？问客服获取原文，即可享受本标准状态变更提醒服务！

专家解读视频

基本信息

标准编号： IEC 61000-3-2 Ed. 3.0

发布时间：2005/11/28 0:00:00

标准类别：Standard

出版单位：International Electrotechnical Committee

标准页数：29

标准简介

Deals with the limitation of harmonic currents injected into the public supply system. Specifies limits of harmonic components of the input current which may be produced by equipment tested under specified conditions. Harmonic components are measured according to Annexes A and B. This part of IEC 61000 is applicable to electrical and electronic equipment having an input current up to and including 16 A per phase, and intended to be connected to public low voltage distribution systems. Arc welding equipment which is not professional equipment, with input current up to and including 16 A per phase, is included in this standard. Arc welding equipment intended for professional use, as specified in IEC 60974-1, is excluded from this standard and may be subject to installation restrictions as indicated in IEC 61000-3-4 or IEC 61000-3-12. The tests according to this standard are type tests. Test conditions for particular equipment are given in Annex C.

本标准替代的旧标准

IEC 60555-2 Ed. 1.0

IEC 60555-1 Ed. 1.0

IEC 61000-3-2 Ed. 2.2

替代本标准的新标准

IEC 61000-3-2 Ed. 3.2

IEC 61000-3-2 Ed. 4.0

等同采用的国际标准

PN EN 61000-3-2:2007 - Identical

I.S. EN 61000-3-2:2006 - Identical

NEN EN IEC 61000-3-2:2006 - Identical

BS EN 61000-3-2:2006 - Identical