DIN 17224 : 1982被替代
STAINLESS STEEL WIRE AND STRIP FOR SPRINGS - TECHNICAL DELIVERY CONDITIONS
出版：German Institute for Standardisation (Deutsches Institut für Normung)
专家解读视频
This standard is included in DIN Handbook 405. Applies to the stainless steel listed in Table 1. These steels are commonly used in the form of work-hardened wire up to about 10 mm in diameter or of strip up to about 1,6 mm thick for the manufacture of springs and sprung components which are to be exposed to corrosive agents and occasionally to slightly elevated temperatures (see Clause A.1). It does not, however, apply to flat products rolled from wire, known as flat wire.
SNV DIN 17224 : 1982 - Identical
ISO 6931-1 : 2016 - Similar to
ISO/DIS 6931-1 : 60.00 (2016) - Similar to
ISO 6931-2 : 2005(R2013) - Similar to
SNV DIN 17224 : 1982 - Identical
