SAE AMS 4165 : 2013被替代
ALUMINUM ALLOY, EXTRUSIONS, 4.4CU - 1.5MG - 0.60MN (2024-T3511), SOLUTION HEAT TREATED, STRESS-RELIEVED BY STRETCHING, AND STRAIGHTENED
出版：SAE International
专家解读视频
基本信息
标准编号： SAE AMS 4165 : 2013
标准类别：Standard
出版单位：SAE International
标准页数：0
标准简介
Specifies an aluminum alloy in the form of extruded bars, rods, shapes, wire, and tubing. Typically used for parts that are subject to excessive warpage during machining due to residual stresses, and for parts needing high strength and whose fabrication does not normally involve welding.
本标准替代的旧标准
替代本标准的新标准
等同采用的国际标准
SAE AMS QQ A 200/3 : 1997 - Similar to
SAE AMS QQ A 200/3 : 1997 - Similar to
QQ A 200/3 : F - Similar to
