当前位置： 首页 > 标准详情页

IEC 60601-2-17 Ed. 2.0被替代

Medical electrical equipment Part 2-17: Particular requirements for the safety of automatically-controlled brachytherapy afterloading equipment

出版：International Electrotechnical Committee

获取原文如何获取原文？问客服获取原文，即可享受本标准状态变更提醒服务！

专家解读视频

基本信息

标准编号： IEC 60601-2-17 Ed. 2.0

发布时间：2004/1/29 0:00:00

标准类别：Standard

出版单位：International Electrotechnical Committee

标准页数：32

标准简介

The use of afterloading equipment for brachytherapy purposes may expose patients to danger if the equipment fails to deliver the required dose to the patient, or if the equipment design does not satisfy standards of electrical and mechanical safety. The equipment may also cause danger to persons in the vicinity if the equipment itself fails to contain the radioactive source(s) adequately within the storage container(s) and/or if there are inadequacies in the design of the treatment room. This Particular Standard establishes requirements to be complied with by manufacturers in the design and construction of afterloading equipment for use in temporary brachytherapy procedures. Its purpose is to identify those features of design that are regarded, at the present time, as essential for the safe operation of such equipment. It places limits on the degradation of equipment performance beyond which it can be presumed that a fault condition exists and where an interlock then operates to return the radioactive source(s) to the storage container(s) and afterwards to prevent continued operation of the equipment.

本标准替代的旧标准

IEC 60601-2-17 Ed. 1.0

替代本标准的新标准

IEC 60601-2-17 Ed. 3.0

等同采用的国际标准

BS EN 60601-2-17:2004 - Identical

DIN EN 60601-2-17 (2004-12) - Identical

NF EN 60601-2-17:2005 - Identical

UNE EN 60601-2-17:2005 - Identical

OVE/ONORM EN 60601-2-17:2005 - Identical

NEN EN IEC 60601-2-17:2004 - Identical

CSA C22.2.601.2.17:1994 (R1999) - Identical