当前位置： 首页 > 标准详情页

SS EN 10215 Ed. 1 (1995)被替代

Continuously Hot-dip Aluminium-zinc (az) Coated Steel Strip And Sheet - Technical Delivery Conditions

出版：Standardiserings-Kommissionen I Sverige

获取原文如何获取原文？问客服获取原文，即可享受本标准状态变更提醒服务！

专家解读视频

基本信息

标准编号： SS EN 10215 Ed. 1 (1995)

发布时间：1995/6/30 0:00:00

标准类别：Standard

出版单位：Standardiserings-Kommissionen I Sverige

标准页数：24

标准简介

Specifies requirements for continuously hot-dip aluminium-zinc alloy coated flat products made of low carbon steels for cold forming or of structural steels in thicknesses less than or equal to 3,0 mm. Covers products that are mainly intended for applications where the protection of the steel base against corrosion is of the greatest importance. Does not apply to: continuously hot-dip zinc coated structural steel sheet and strip; electrolytically zinc coated steel flat products; continuously hot-dip zinc-aluminium alloy coated steel flat products; continuously organic coated flat steel products.

标准备注

Supersedes SS 14 11 51, SS 14 11 52, SS 14 12 70, SS 14 13 60, SS 14 21 21, SS 14 21 22. (12/2003)

本标准替代的旧标准

SS 14 13 60 Ed. 4 (1992)

SS 14 21 21 Ed. 4 (1992)

SS 14 11 52 Ed. 3 (1991)

SS 14 11 51 Ed. 3 (1991)

SS 14 12 70 Ed. 4 (1992)

SS 14 21 22 Ed. 4 (1992)

替代本标准的新标准

SS EN 10326 Ed. 1 (2004)

等同采用的国际标准