ISO 2401:1972现行
Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient
出版：International Organization for Standardization
专家解读视频
Specifies requirements for covered carbon and carbon manganese steel electrodes for manual metal-arc welding depositing weld metal with a maximum tensile strength of 650 N/square mm. Covers Information to be supplied by the purchaser (when ordering electrodes that meet the requirements of this standard): the number and date of the British Standard; whether a test certificate for the initial tests or for the most recent periodic check tests is required; the electrode classification, at least the toughness, strength and covering (STC) code and/or the manufacturer's trade designation; whether mechanical test certificates are required for each batch of electrodes supplied and whether any elements need to be controlled to specific limits and whether chemical analysis certificates are needed.
BIS IS 13043:1991 (R2003) - Equivalent
SN EN 22401:1995 - Identical
NEN ISO 2401:1985 - Identical
ONORM EN 22401:1995 - Identical
DIN EN 22401 (1994-04) - Identical
BS EN 22401:1994 - Equivalent
DIN 32523 (1984-04) - Similar
I.S. EN 22401:1994 - Identical
UNI EN 22401:1996 - Equivalent
NF EN 22401:1994 - Identical
BS 639:1986 - Equivalent
NFA 81 306:1975 - Equivalent
PN EN 22401:1997 - Identical
NS 5543 Ed. 1 (1977) - Identical
UNE EN 22401:1995 - Identical
SS EN 22401 Ed. 1 (1994) - Identical
SS ISO 2401 Ed. 1 (1994) - Identical
PN EN 22401 : 1997 - Identical
DS EN 22401 : 1994 - Identical
NS 5543 : 1ED 1977 - Identical
SANS 2401 : 1ED 1972(R2017) - Identical
NEN ISO 2401 : 1985 C1 1996 - Identical
DIN 32523 : 1984 - Similar to
