AS/NZS 60898.2:2004 (R2016)现行
Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. and d.c. operation (IEC 60898-2 Ed. 1.1 (2003) MOD)
出版：Standards Australia
专家解读视频
Proposes the adoption of IEC 60898-2:2003 as a joint Australian/New Zealand Standard. Contains essential safety and associated requirements for single-pole and two-pole circuit-breakers which are suitable for operation with divert current and have a rated d.c. voltage not exceeding 220 V for single-pole and 440 V for two-pole circuit-breakers, a rated current not exceeding 125 A and a rated d.c. short-circuit capacity not exceeding 10 000 A. This draft Standard is intended for use in conjunction with IEC 60898-1 (which has been prepared as a revision of AS/NZS 4989:1997). Annex ZZ lists variations for Australian and New Zealand conditions.RECONFIRMATION NOTICETechnical Committee EL-004 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 23 December 2015.Approved for reconfirmation in New Zealand on behalf of the Standards Council of New Zealand on 18 May 2016.The following are represented on Technical Committee EL-004:Association of Accredited Certification BodiesAustralian Chamber of Commerce and IndustryAustralian Industry GroupConsumer Electronics Suppliers AssociationConsumers Federation of AustraliaElectrical Compliance Testing AssociationElectrical Regulatory Authorities CouncilEngineers AustraliaInternational Accreditation New ZealandNew Zealand Manufacturers and Exporters AssociationNSW Fair TradingPlastics Industry Pipe Association of AustraliaWorksafe New Zealand
Reconfirmed 10/06/2016.
This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand.
IEC 60898-2 Ed. 1.1 - Modified
