IEC 60216-6 Ed. 2.0现行

Specifies the experimental and calculation procedures for deriving the thermal endurance characteristics, temperature index (TI) and relative thermal endurance index (RTE) of a material using the ""fixed time frame method (FTFM)"". In this protocol, the ageing takes place for a small number of fixed times, using the appropriate number of ageing temperatures throughout each time, the properties of the specimens being measured at the end of the relevant time interval. This differs from the procedure of IEC 60216-1, where ageing is conducted at a small number of fixed temperatures, property measurement taking place after ageing times dependent on the progress of ageing. The diagnostic tests employed in the fixed time frame method are restricted to destructive tests. The method has not as yet been applied to non-destructive or proof test procedures. Both the TI and the RTE determined according to the FTFM protocol are derived from experimental data obtained in accordance with the instructions of IEC 60216-1 and IEC 60216-2 as modified in this standard. The calculation procedures and statistical tests are modified from those of IEC 60216-3 and IEC 60216-5. The significant technical changes with respect to the previous edition are as follows. - This new edition has been supplemented by Annex G and the corresponding softwar

IEC 60216-6 Ed. 1.0

DIN EN 60216-6 (2007-06) - Identical

OVE/ONORM EN 60216-6:2007 - Identical

NEN EN IEC 60216-6:2006 - Identical

SS EN 60216-6 Ed. 2 (2006) - Identical

PN EN 60216-6:2007 - Identical

BS EN 60216-6:2006 - Identical

NF EN 60216-6:2006 - Identical

I.S. EN 60216-6:2004 - Identical

CEI EN 60216-6 Ed. 2 (2007) - Identical

VDE 0304-26:2007 - Identical