ISO 5167:1980被替代
Measurement Of Fluid Flow By Means Of Orifice Plates, Nozzles And Venturi Tubes Inserted In Circular Cross Section Conduits Running Full
出版：International Organization for Standardization
专家解读视频
Specifies the geometry and method of use (installation and operating conditions) of orifice plates, venturi tubes and nozzles when they are inserted in a conduit running full, to determine the rate of the fluid flowing in the conduit. Also gives necessary information for calculating the flow rate and its associated uncertainty.Applies only to pressure difference devices in which the flow remains subsonic throughout the measuring section, is steady or varies only slowly with time and the fluid is single-phased.Does not apply to pipe sizes less than 50 mm or more than 1,200 mm or for pipe Reynolds numbers below 3150.
Supersedes ISO 541
(07/2004)
NBN E 44 004:1986 - Identical
NBN E 51 005:1989 - Identical
NFX 10 102:1980 - Identical
NBN E 44 003 : 1985 - Identical
NFX 10 102 : 1980 - Identical
NBN EN 200 : 2008 - Corresponds
NBN E 51 005 : 1989 - Identical
NBN E 44 004 : 1986 - Identical
NBN EN 27842 : 1992 - Identical
NBN E 51 005 : 1989 - Identical
NBN E 44 003 : 1985 - Identical
NBN E 44 004 : 1986 - Identical
NFX 10 102 : 1980 - Identical
BS 1042-1-1.1:1981 - Equivalent
NBN E 44 003:1985 - Identical
NBN EN 27842:1992 - Identical
DIN 1952 (1982-07) - Equivalent
