DIN 1016 : 1987被替代
STEEL FLAT PRODUCTS - HOT ROLLED SHEET AND STRIP - LIMIT DEVIATIONS, FORM AND MASS TOLERANCES
出版：German Institute for Standardisation (Deutsches Institut für Normung)
专家解读视频
Specifies the limit deviations, form tolerances and mass tolerances for hot rolled non-coated steel flat products, such as strip for immediate application, in widths from 10 to 2000 mm and thicknesses from 0,8 to 20 mm, strip for cold reducing, in widths from 10 to 2000 mm and thicknesses from 0,8 to 8 mm, bars (cut lengths) cut from strip less than 600 mm in width, in thicknesses from 0,8 to 15 mm, and sheet cut from strip, in widths from 600 to 2000 mm and thicknesses from 0,8 to less than 3 mm; made from the steel specified in Clause 5.
EURONORM 51 : 1982 - Similar to
ISO 3573 : 2012 - Similar to
ISO 5952 : 2011 - Similar to
EURONORM 48 : 1984 - Similar to
ISO 4996 : 2014 - Similar to
ISO 3576 : 1976 - Similar to
EURONORM 112 : 1981 - Similar to
ISO 6317 : 2008 - Similar to
EURONORM 51 : 1982 - Similar to
EURONORM 112 : 1981 - Similar to
EURONORM 48 : 1984 - Similar to
ISO 3576 : 1976 - Similar to
