SS EN 1870-13 Ed. 1 (2007)现行

Specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to horizontal beam panel sawing machines where the saw unit of the front cutting line is mounted below the workpiece support and which are manually or mechanically loaded and/or unloaded, fitted with: - a side pressure device and/or; - the facility for scoring and/or; - the facility for post-formed/soft-formed edge pre-cutting and/or; - a panel turning device and/or; - a pushing out device and/or; - pneumatic clamping of the saw blade and/or; - a powered panel loading device and/or; - a grooving device and/or; - additional cutting line(s) inside the machine for longitudinal and/or head cut (before transversal cutting line) and/or; - workpiece vacuum clamping as part of a panel turning device or of a panel loading device, hereinafter referred to as "machines" when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.

2007 Edition Re-Issued in March 2012 & incorporates AMD 2 2012. (05/2012)

NEN EN 1870-13:2007 - Identical

UNI EN 1870-13:2010 - Identical

ONORM EN 1870-13:2010 - Identical

SN EN 1870-13:2008 - Identical

UNI EN 1870-13:2008 - Identical

ONORM EN 1870-13:2008 - Identical

NS EN 1870-13:2007 - Identical

NBN EN 1870-13:2008 - Identical

NF EN 1870-13:2008 - Identical

DIN EN 1870-13 (2008-03) - Identical

I.S. EN 1870-13:2007 - Identical

BS EN 1870-13:2007+A2:2012 - Identical