ISO 3582:2000现行

This International Standard specifies a small-scale laboratory screening procedure for comparing the relative horizontal burning characteristics of small test pieces of flexible cellular polymeric material exposed to a low-energy source of heat. It is intended only for the purpose of assessing quickly and simply the horizontal burning characteristics of small test pieces of the material as such, i.e. considered without reference to the environmental conditions under which the material, or products made from it, may be used. As a consequence, it is not possible to establish a correlation between the results of this test and the performance of such materials or products under actual service conditions. The test is restricted to test pieces of thickness greater than 5 mm. Results of tests on test pieces of different thicknesses are not comparable.This test method is not intended to be used to assess the potential fire hazard in use.NOTE For cellular plastics having a density less than 250 kg/m3 , another test method exists: ISO 9772:—1) , Cellularplastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame. The test equipment and procedures differ from those contained in this International Standard, and it should not therefore be assumedthat they will produce identical test results.

ISO 3582:1978

NS EN ISO 3582:2000 - Identical

UNI 8068:2005 - Similar

NBN EN ISO 3582:2001 - Identical

ONORM EN ISO 3582:2007 - Identical

NEN ISO 3582:1989 - Identical

DIN EN ISO 3582 (2007-12) - Identical

JIS K 6400-6:2004 - Identical

UNE EN ISO 3582:2001 - Identical

NF EN ISO 3582:2002 - Identical

DIN EN ISO 3582 (2001-03) - Identical

SN EN ISO 3582:2001 - Identical

BS EN ISO 3582:2001 - Identical

UNI EN ISO 3582:2005 - Identical

I.S. EN ISO 3582:2001 - Identical

NFT 56 125:1981 - Similar

PN EN ISO 3582:2002 - Identical

SS EN ISO 3582:2000 - Identical

NEN EN ISO 3582:2000 - Identical

UNI EN ISO 3582:2008 - Identical

ISO 3582:2000/Amd 1:2007 -