IEC 60296 Ed. 3.0被替代

Covers specifications and test methods for unused mineral insulating oils. It applies to oil delivered to the agreed point and time of delivery, intended for use in transformers, switchgear and similar electrical equipment in which oil is required as an insulant and for heat transfer. These oils are obtained by distillation and refining of crude petroleum. Oils with and without additives are both within the scope of this standard. This standard is applicable only to unused mineral insulating oils. Reclaimed oils are beyond the scope of this standard. This standard does not apply to mineral oils used as impregnants in cables or capacitors. NOTE Mineral insulating oils complying with the requirements of this standard, of the same class and containing no additives (see 3.4), are considered to be compatible with one another and can be mixed in any proportion. This does not apply to oils containing additives. Where the user wishes to mix such oils, a check is recommended to be made to ensure that the mixture meets the requirements of this standard. Main changes with regard to previous edition include: the three classes of previous edition have been replaced by only two: transformer oil and low temperature switchgear oil, but a new concept, the lowest cold start energizing temperature, has been included; new properties have been added (i.e. charging tendency); values for properties have been revised.

IEC 60296 Ed. 2.0

IEC 60296 Ed. 4.0

OVE/ONORM EN 60296:2005 - Identical

NEN EN IEC 60296:2004 - Identical

UNE EN 60296:2004 - Identical

SS EN 60296 Ed. 1 (2004) - Identical

PN EN 60296:2007 - Identical

I.S. EN 60296:2004 - Identical

NF EN 60296:2004 - Identical

VDE 0370-1:2005 - Identical

DIN EN 60296 (2005-01) - Identical

BS EN 60296:2004 - Identical

CEI EN 60296 Ed. 9 (2004) - Identical