DIN EN 10210-2 : 2016被替代
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES
出版：German Institute for Standardisation (Deutsches Institut für Normung)
专家解读视频
This standard is included in DIN Handbook 28. Describes tolerances for hot finished circular, square, rectangular and elliptical structural hollow sections, manufactured in wall thicknesses up to 120 mm, in the following size ranges: Circular: Outside diameters up to 2 500 mm; Square: Outside dimensions up to 800 mm x 800 mm; Rectangular: Outside dimensions up to 750 mm x 500 mm; Elliptical: Outside dimensions up to 500 mm x 250 mm.
UNE EN 10210-2 : 2007 - Identical
ONORM EN 10210-2 : 2006 - Identical
EN 10210-2 : 2006 COR 2007 - Identical
NEN EN 10210-2 : 2006 C1 2007 - Identical
SN EN 10210-2 : 2006 CORR 2007 - Identical
NBN EN 10210-2 : 2006 COR 2007 - Identical
UNI EN 10210-2 : 2006 - Identical
PREN 10210-2 : DRAFT 2016 - Identical
NS EN 10210-2 : 2006 AC 2007 - Identical
NF EN 10210-2 : 2006 - Identical
BS EN 10210-2 : 2006 - Identical
SN EN 10210-2 : 2006 CORR 2007 - Identical
NF EN 10210-2 : 2006 - Identical
ONORM EN 10210-2 : 2006 - Identical
NBN EN 10210-2 : 2006 COR 2007 - Identical
UNI EN 10210-2 : 2006 - Identical
NEN EN 10210-2 : 2006 C1 2007 - Identical
UNE EN 10210-2 : 2007 - Identical
BS EN 10210-2 : 2006 - Identical
I.S. EN 10210-2:2006 - Identical
ISO 657-14 : 2000 - Identical
EN 10210-2 : 2006 COR 2007 - Identical
NS EN 10210-2 : 2006 AC 2007 - Identical
I.S. EN 10210-2:2006 - Identical
