IEC 60332-1-3 Ed. 1.0现行
Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles
出版：International Electrotechnical Committee
专家解读视频
IEC 60332-1-3:2004 Specifies a test procedure for assessment of falling flaming droplets/ particles when a single vertical electrical insulated conductor or cable, or optical fibre cable, is subjected to defined fire conditions. NOTE - Testing to IEC 60332-1-3 may be performed simultaneously with that to IEC 60332-1-2, if required. Recommended requirements for performance are given in Annex A. IEC 60332-1-3 specifies the use of a 1 kW pre-mixed flame and is for general use, except that the procedure specified may not be suitable for the testing of small single insulated conductors or cables of less than 0,5 mm2 total cross-section because the conductor melts before the test is completed, or for the testing of small optical fibre cables because the cable is broken before the test is completed. It has the status of a horizontal standard in accordance with IEC Guide 104.
VDE 0482-332-1-3:2005 - Identical
JIS C 3665-1-3:2007 - Identical
DIN EN 60332-1-3 (2005-06) - Identical
BS EN 60332-1-3:2004 - Identical
CEI EN 60332-1-3 Ed. 1 (2006) - Identical
AS/NZS 1660.5.6:2005 - Modified
NEN EN IEC 60332-1-3:2005 - Identical
OVE/ONORM EN 60332-1-3:2005 - Identical
GOST R IEC 60332-1-3:2007 - Identical
I.S. EN 60332-1-3:2004 - Identical
NF EN 60332-1-3:2005 - Identical
SS EN 60332-1-3 Ed. 1 (2004) - Identical
UNE EN 60332-1-3:2005 - Identical
EN 60332-1-3:2004 - Identical
PN EN 60332-1-3:2005 - Identical
