DIN 6900-5 : 2004现行
SCREW AND WASHER ASSEMBLIES WITH COARSE THREAD - PART 5: WITH CAPTIVE CONICAL SPRING WASHER
出版：German Institute for Standardisation (Deutsches Institut für Normung)
专家解读视频
基本信息
标准编号： DIN 6900-5 : 2004
发布时间：2004/1/1 0:00:00
标准类别：Standard
出版单位：German Institute for Standardisation (Deutsches Institut für Normung)
标准页数：3
标准简介
This standard is included in DIN Handbook 10. Specifies requirements for screw and washer assemblies consisting of an M 2,5 to M 12 screw with flat bearing face, assigned to property classes 8.8 up to and including 10.9, and a captive conical spring washer. Wave spring washers are intended to counteract loosening of bolted connections (e.g. as a result of setting) (cf. DIN 267 Part 26). They do not effectively prevent loosening of the connection under varying radial load and are thus designed for use with short screws predominantly subject to thrust.
本标准替代的旧标准
