IEC 60068-2-30 Ed. 3.0现行
Environmental testing Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
出版：International Electrotechnical Committee
专家解读视频
IEC 60068-2-30:2005 Determines the suitability of components, equipment or other articles for use, transportation and storage under conditions of high humidity - combined with cyclic temperature changes and, in general, producing condensation on the surface of the specimen. If the test is being used to verify the performance of a specimen whilst it is being transported or stored in packaging then the packaging will normally be fitted when the test conditions are being applied. For small, low mass specimens, it may be difficult to produce condensation on the surface of the specimen using this procedure; users should consider the use of an alternative procedure such as that given to IEC 60068-2-38. The main changes with respect to the previous edition are listed below: - editorial changes, - addition of normative references, - addition of guidance for temperature tolerances, - period for recovery has been extended. It has the status of a horizontal standard in accordance with IEC Guide 104.
PN EN 60068-2-30:2008 - Identical
NEN EN IEC 60068-2-30:2006 - Identical
PN EN 60068-2-30:2006 - Identical
NF EN 60068 2-30:2006 - Identical
NBR IEC 60068-2-30:2006 - Identical
DIN EN 60068-2-30 (2006-06) - Identical
BS EN 60068-2-30:2005 - Identical
NBN C 83 300:1985 - Identical
SEN 43 16 04:1971 - Similar
AS 1099.2Db-1982 - Equivalent
CEI EN 60068-2-30 Ed. 2 (2006) - Identical
OVE/ONORM EN 60068-2-30:2006 - Identical
SS EN 60068 Ed. 3 (2000) - Identical
I.S. EN 60068-2-30:2005 - Identical
SS EN 60068-2-30 Ed. 2 (2006) - Identical
NBN C 83 100:1984 - Identical
UNE 20501-2-30:1994 - Identical
UNE EN 60068-2-30:2006 - Identical
NFC 20 730:1987 - Identical
BS 2011-2.1Db:1981 - Identical
HD 323.2.30:1987 - Identical
SN EN 60068-2-30:2005 - Identical
NBN C 83 160:1984 - Identical
DIN IEC 60068-2-30 (1986-09) - Identical
