ISO 296 : 1991(R2019)现行
MACHINE TOOLS - SELF HOLDING TAPERS FOR TOOL SHANKS
出版：International Organization for Standardization
专家解读视频
This International Standard specifies the dimensions of self-holding tapers for tool shanks with a small taper of about 4%to 5%, classified, according to their use, into the three following catergories: a)tapers for general use; b)smaller tapers; c)larger tapers.
UNE 16019 : 1975 - Identical
NFE 66 531 : 1990 - Similar to
DS ISO 296 : 1992 - Identical
UNE 15007 : 1994 - Identical
UNI ISO 296 : 1995 - Identical
SNV ISO 296 : 1991 - Identical
SAC GB/T 1443 : 1996 - Identical
PN 92/M-55012 : 1992 - Identical
NF ISO 21996 : 1996 - Identical
BS 1660-1(1988) : 1988 - Identical
NS 1942 : 2ED 1985 - Identical
UNE 16019 : 1975 - Identical
SNV ISO 296 : 1991 - Identical
PN 92/M-55012 : 1992 - Identical
NFE 66 531 : 1990 - Similar to
SAC GB/T 1443 : 1996 - Identical
DS ISO 296 : 1992 - Identical
NF ISO 21996 : 1996 - Identical
UNI ISO 296 : 1995 - Identical
UNE 15007 : 1994 - Identical
NS 1942 : 2ED 1985 - Identical
