ISO 7093-2:2000现行
Plain washers - Large series Part 2: Product grade C
出版：International Organization for Standardization
专家解读视频
This part of ISO 7093 specifies the characteristics of large-series, product-grade-C plain washers in the 100 HV hardness class, of nominal sizes (nominal thread diameters) ranging from 3 mm to 36 mm inclusive.Washers conforming to this part of ISO 7093 are intended for use in cases where soft material pieces are to be clamped or where there are large clearance holes in the workpiece. Nevertheless, in the latter case, the suitability of the washer thickness should be checked.Washers of hardness class 100 HV are suitable for:- hexagon bolts and screws of product grade C in property classes up to and including 6.8;- hexagon nuts of product grade C in property classes up to and including 6;- case-hardened thread rolling screws.If dimensions other than those listed in this part of ISO 7093 are required, they should be selected from those given in ISO 887.
GB/T 96.2-2002 - Equivalent
UNE EN ISO 7093-2:2000 - Identical
NBN EN ISO 7093-2:2000 - Identical
UNI EN ISO 7093-2:2001 - Identical
I.S. EN ISO 7093-2:2000 - Identical
PN EN ISO 7093-2:2004 - Identical
NS EN ISO 7093-2 Ed. 1 (2000) - Identical
SS EN ISO 7093-2 Ed. 1 (2000) - Identical
NF EN ISO 7093-2:2000 - Identical
SN EN ISO 7093-2:2000 - Identical
BS EN ISO 7093-2:2000 - Identical
DIN EN ISO 7093-2 (2000-11) - Identical
ONORM EN ISO 7093-2:2000 - Identical
NEN EN ISO 7093-2:2000 - Identical
