NS EN ISO 294-5:2013被替代
Plastics - Injection Moulding Of Test Specimens Of Thermoplastic Materials - Part 5: Preparation Of Standard Specimens For Investigating Anisotropy (Iso 294-5:2011)
出版：Norwegian Standards (Norges Standardiseringsforbund)
专家解读视频
基本信息
标准编号： NS EN ISO 294-5:2013
发布时间：2013/4/1 0:00:00
标准类别：Standard
出版单位：Norwegian Standards (Norges Standardiseringsforbund)
标准页数：16
标准简介
Defines a two-cavity mould (designated the type F ISO mould) for the injection moulding of 80 mm x 90 mm plates with a preferred thickness of 2 mm for single-point data acquisition because 2 mm has been found to provide the maximum anisotropic properties, with only a slight sensitivity to the rate of injection.
替代本标准的新标准
等同采用的国际标准
EN ISO 294-5:2017 - Identical
