当前位置： 首页 > 标准详情页

ISO 4190-1:1999被替代

Lift (US: Elevator) installation Part 1: Class I, II, III and VI lifts

出版：International Organization for Standardization

获取原文如何获取原文？问客服获取原文，即可享受本标准状态变更提醒服务！

专家解读视频

基本信息

标准编号： ISO 4190-1:1999

发布时间：1999/8/12 0:00:00

标准类别：Standard

出版单位：International Organization for Standardization

标准页数：19

标准简介

This part of ISO 4190 specifies the necessary dimensions to permit the installation of passenger lifts of classes I, II, III and VI as defined in 2.2.The dimensions given reflect the requirements for the apparatus. Due note should be made of national regulations which may demand greater dimensions in some instances.This part of ISO 4190 is applicable to all new lift installations, irrespective of drive systems, with a car with one entrance, to be installed in a new building. Where relevant, it may be used as a basis for an installation in an existing building.It does not cover lifts whose the speed is higher than 6,0 m/s: manufacturers should be consulted for such installations.

本标准替代的旧标准

ISO 4190-1:1990

NS 3800 Ed. 1 (1982)

替代本标准的新标准

ISO 4190-1:2010

等同采用的国际标准

KS B ISO 4190-1:2002 - Identical

BS 5655-5:1981 - Similar

SS 76 35 20 Ed. 1 (1984) - Identical

BS ISO 4190-1:1999 - Identical

NF ISO 4190-1:2004 - Identical

DIN 15309 (2002-12) - Identical