
Insulation coordination for equipment within low-voltage systems Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
出版:International Electrotechnical Committee

专家解读视频
Specifies the dimensioning of clearances and creepage distances for spacings equal to or less than 2 mm for printed wiring board and equivalent constructions, where the clearance and the creepage distance are identical and are along the surface of solid insulation. The dimensioning in this standard is more precise than that provided by IEC 60664-1. However, if the precision provided by this standard is not required, IEC 60664-1 may be applied instead. This standard is based on the following criteria for dimensioning: - minimum clearances independent of the micro-environment; - minimum creepage distances for pollution degrees 1, 2 and 3 to avoid failure due to tracking; - minimum creepage distances to avoid flashover across the insulating surface. A test method is specified for allocating unclassified insulating material to the relevant water adsorption group. The following major technical changes are: - Amendment of Japanese mains conditions with regard to the rated impulse voltages, the rationalized voltages and the nominal voltages of supply systems for different modes of overvoltage control. - Amendment of dimensioning of clearances smaller than 0,01 mm. Alignment of the table and the corresponding formula regarding test voltages for verifying clearances at different altitudes. - Amendment of interpolation of the creepage distance values for functional insulation. - Revision of the former Clause 4 ""Tests and measurements"" (now Clause 6) to achieve a more detailed description of the tests and their purpose, the test equipment and possible alternatives. Has the status of a basic safety publication in accordance with IEC Guide 1
SS EN 60664-5 Ed. 1 (2004) - Identical
PN EN 60664-5:2008 - Identical
NF EN 60664-5:2004 - Identical
DIN EN 60664-5 (2004-04) - Identical
OVE/ONORM EN 60664-5:2004 - Identical
DIN EN 60664-5 (2008-05) - Identical
EN 60664-5:2007 - Identical
UNE EN 60664-5:2005 - Identical
VDE 0110-5:2004 - Identical
PN EN 60664-5:2006 - Identical
UNE EN 60664-5:2008 - Identical
CEI EN 60664-5 Ed. 1 (2004) - Identical
I.S. EN 60664-5:2003 - Identical
NF EN 60664-5:2008 - Identical
CEI EN 60664-5 Ed. 2 (2008) - Identical
BS EN 60664-5:2007 - Identical
SN EN 60664-5:2003 - Identical
SS EN 60664-5 Ed. 2 (2007) - Identical
NEN EN IEC 60664-5:2007 - Identical
VDE 0110-5:2008 - Identical
OVE/ONORM EN 60664-5:2008 - Identical