AS 3635-1990 (R2017)现行

Specifies requirements for parallel screw threads having the Unified thread form for the diameter size range No. 0 (0.060 in) to 6 in inclusive. Limits of size for the Unified coarse, fine, extra fine, and constant pitch screws and a supplementary series of Unified threads of diameter greater than 6 in are given. It also covers screw gauges, associated check and setting gauges, and plug gauges with information being given on types of gauges, materials and hardness, general gauge design requirements, marking, and general notes on inspection of screw threads. Appendices give the basis of tabulated values, examples for calculating the limits of size of untabulated screw threads, notes on the production of external threads, notes on pitch and flank angle errors, notes on recommended system for gauging coated threads, and the limiting dimension of screw gauges for the more commonly used Unified threads.RECONFIRMATION NOTICETechnical Committee ME-029 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 16 June 2017.The following are represented on Technical Committee ME-029:Association of Accredited Certification BodiesAssociation of Wall and Ceiling Industries of AustraliaAustralian Chamber of Commerce and IndustryAustralian Engineered Fasteners and Anchors CouncilAustralian Industry GroupAustralian Steel InstituteAUSTROADSBureau of Steel Manufacturers of AustraliaGalvanizers Association of AustraliaMaterials AustraliaNational Association of Steel-Framed HousingNational Association of Testing Authorities AustraliaNew Zealand Heavy Engineering Research AssociationSociety of Automotive Engineers- AustralasiaSteel Construction New ZealandSwinburne University of Technology

Reconfirmed 07/07/2017.
This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand.

AS B133.3-1966

AS B133.1-1963

DR 87198

AS B121.4-1965

AS B133.2-1963

AS B121.1-1962

AS B133.3-1966

AS B121.4-1965

AS B121.1-1962

AS B133.2-1963

DR 87198

AS B133.1-1963