当前位置： 首页 > 标准详情页

IEC 61557-3 Ed. 2.0现行

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 3: Loop impedance

出版：International Electrotechnical Committee

获取原文如何获取原文？问客服获取原文，即可享受本标准状态变更提醒服务！

专家解读视频

基本信息

标准编号： IEC 61557-3 Ed. 2.0

发布时间：2007/1/29 0:00:00

标准类别：Standard

出版单位：International Electrotechnical Committee

标准页数：19

标准简介

This part of IEC 61557 specifies the requirements applicable to equipment for measuring the loop impedance between a phase conductor and the protective conductor or between a phase conductor and neutral or between two phase conductors by using the voltage drop when the circuit under test is loaded. This second edition cancels and replaces the first edition published in 1997. This edition constitutes a technical revision. The following changes were made with respect to the previous edition: a) definitions complemented; b) revision of some requirements; c) addition of information on operating instructions; d) addition of new influence quantities E9 and E10.

本标准替代的旧标准

IEC 61557-3 Ed. 1.0

等同采用的国际标准

DIN EN 61557-3 (1998-05) - Identical

I.S. EN 61557-3:2007 - Identical

DIN EN 61557-3 (2008-02) - Identical

ONORM OVE EN 61557-3:1997 - Identical

VDE 0413-3:1998 - Identical

SS EN 61557-3 Ed. 2 (2007) - Identical

CEI EN 61557-3 Ed. 2 (2008) - Identical

NF EN 61557-3:2007 - Identical

UNE EN 61557-3:2007 - Identical