当前位置： 首页 > 标准详情页

IEC 60099-5:3.0现行

Surge arresters - Part 5: Selection and application recommendations （IEC 60099-5:2018 ）

出版：International Electrotechnical Committee

获取原文如何获取原文？问客服获取原文，即可享受本标准状态变更提醒服务！

专家解读视频

基本信息

标准编号： IEC 60099-5:3.0

标准类别：Standard

出版单位：International Electrotechnical Committee

标准页数：190

标准简介

IEC 60099-5:2018 is available as IEC 60099-5:2018 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60099-5:2018 provides information, guidance, and recommendations for the selection and application of surge arresters to be used in three-phase systems with nominal voltages above 1 kV. It applies to gapless metal-oxide surge arresters as defined in IEC 60099-4, to surge arresters containing both series and parallel gapped structure – rated 52 kV and less as defined in IEC 60099-6 and metal-oxide surge arresters with external series gap for overhead transmission and distribution lines (EGLA) as defined in IEC 60099-8. In Annex J, some aspects regarding the old type of SiC gapped arresters are discussed. Surge arrester residual voltage is a major parameter to which most users have paid a lot of attention to when selecting the type and rating. Typical maximum residual voltages are given in Annex F. It is likely, however, that for some systems, or in some countries, the requirements on system reliability and design are sufficiently uniform, so that the recommendations of the present standard may lead to the definition of narrow ranges of arresters. The user of surge arresters will, in that case, not be required to apply the whole process introduced here to any new installation and the selection of characteristics resulting from prior practice may be continued. Annexes H and I present comparisons and calculations between old line discharge classification and new charge classification. This third edition cancels and replaces the second edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition regarding the new surge arrester classification introduced in IEC 60099-4:2014: a) Expanded discussion of comparison between the old and new classification and how to calculate or estimate the corresponding charge for different stresses. b) New annexes dealing with: - Comparison between line discharge classes and charge classification - Estimation of arrester cumulative charges and energies during line switching Keywords: selection and application of surge arrestors, nominal voltages above 1 kV.

等同采用的国际标准

OVE EN IEC 60099-5:2019 - Identical

CEI EN IEC 60099-5 : 2018 - Identical

NEN-EN-IEC 60099-5 : 2018 - Identical

DIN EN IEC 60099-5:2019 - Identical

DS/EN IEC 60099-5:2018 - Identical

DIN EN IEC 60099-5; VDE 0675-5 : 2019 - Identical

PN-EN IEC 60099-5:2018 - Identical

EN IEC 60099-5 : 2018 - Identical

VDE 0675-5 :2019-02 - Identical

DIN EN IEC 60099-5:2019 - Identical

EN IEC 60099-5 : 2018 - Identical