当前位置： 首页 > 标准详情页

ISO 604:2002现行

Plastics - Determination of compressive properties

出版：International Organization for Standardization

获取原文如何获取原文？问客服获取原文，即可享受本标准状态变更提醒服务！

专家解读视频

基本信息

标准编号： ISO 604:2002

发布时间：2002/3/7 0:00:00

标准类别：Standard

出版单位：International Organization for Standardization

标准页数：18

标准简介

This International Standard specifies a method for determining the compressive properties of plastics under defined conditions. A standard test specimen is defined but its length may be adjusted to prevent buckling under load from affecting the results. A range of test speeds is included.The method is used to investigate the compressive behaviour of the test specimens and for determining the compressive strength, compressive modulus and other aspects of the compressive stress/strain relationship under the conditions defined.The method applies to the following range of materials:- rigid and semi-rigid thermoplastic moulding and extrusion materials, including compounds filled and reinforced by e.g. short fibres, small rods, plates or granules in addition to unfilled types; rigid and semi-rigid thermoplastic sheet;- rigid and semi-rigid thermoset moulding materials, including filled and reinforced compounds; rigid and semi-rigid thermoset sheet;- thermotropic liquid-crystal polymers.

本标准替代的旧标准

ISO/FDIS 604

ISO 604:1993

ISO/FDIS 604 : 60.00 (2001)

等同采用的国际标准

UNE EN ISO 604:2003 - Identical

UNI EN ISO 604:2008 - Identical

SS EN ISO 604 Ed. 2 (2003) - Identical

UNE 53189-4:1975 - Identical

PN EN ISO 604:2006 - Identical

I.S. EN ISO 604:2003 - Identical

NBN EN ISO 604:2003 - Identical