当前位置： 首页 > 标准详情页

IEC 60034-14 ed 4.0:2018现行

Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity

出版：International Electrotechnical Committee

获取原文如何获取原文？问客服获取原文，即可享受本标准状态变更提醒服务！

专家解读视频

基本信息

标准编号： IEC 60034-14 ed 4.0:2018

标准类别：Revision

出版单位：International Electrotechnical Committee

标准页数：0

标准简介

This part of IEC 60034 specifies the factory acceptance vibration test procedures and vibration limits for certain electrical machines under specified conditions, when uncoupled from any load or prime mover.It is applicable to DC and three-phase AC machines, with shaft heights 56 mm and higher and a rated output up to 50 MW, at operational speeds from 120 min–1 up to and including 15 000 min–1.This document is not applicable to machines mounted in situ (on site), three-phase commutator motors, single-phase machines, three-phase machines operated on single-phase systems, vertical waterpower generators, turbine generators greater than 20 MW and machines with magnetic bearings or series-wound machines. NOTE For machines measured in situ, refer to applicable parts of ISO 20816, ISO 10816 and ISO 7919.

本标准替代的旧标准

IEC 60034-14 : 3.1

等同采用的国际标准

SS-EN IEC 60034-14:2019 - Identical

CEI EN IEC 60034-14 : 2019 - Identical

NEN-EN-IEC 60034-14:2018 - Identical

SN EN IEC 60034-14:2018 - Identical

I.S. EN IEC 60034-14:2018 - Identical

BS EN IEC 60034-14:2018 - Identical

EN IEC 60034-14:2018 - Identical

PN-EN IEC 60034-14:2019 - Identical

OVE EN IEC 60034-14 : 2019 05 01 - Identical